Danish Army
Specific: 8 standard Gossilies
produced Caterpillar 950 Wheel Loader s/n 43J1-UP were
modified according to Danish Army Specification.
Fitted with hydraulic winch, ground driven supplementary
steering circuit, equipment quick coupler, rear fenders,
army standard electrical receptacle and few other minor
changes.
The attachment quick coupler allows easy change between
the lift fork, bucket, crane and other special equipment.
The loader also saw service in the former Yugoslavia.
Historical: N/A.
Length: 5.60 m (218 inches).
Width: 2.59 m (101 inches).
Height: 3.32 m (129 inches).
Weight: 15.300 kg (33.660 lb.).
Engine: 4-cylinder Caterpillar, type 3304T, 7.000 cm3
(427 cubic inches), turbo charged.
Horsepower: 130 at 2.150 rpm.
Transmission: 4-speed Caterpillar 1P 5254
power-shift transmission with torque converter.
Transfer case: Part of standard transmission
system.
Electrical system: 24 volt.
Brakes: Air-over hydraulic with separate circuit
for each axle.
Fording depth:
without preparation: 0.9 m (35 inches)
Tyres: 20.5 - 25.
Fuel type: Diesel.
Fuel capacity: 200 liter (44 gallons).
Range: N/A.
Crew: 1.
Additional: The engine is equipped with
glow plugs for low temperature start. The cooling system
is a pressurized water/glycol system with integrated
transmission- and engine oil coolers. The parking brake
is an air released, spring activated drive line brake,
which acts as safety brake, in case of lost air pressure.
The steering system is Orbitrol-over-hydraulic pivot
steering with separate circuits. In case of engine stop
the ground driven hydraulic circuit secures safe steering
when vehicle is rolling. Mounted with hydraulic driven
Sepson 6301 B 10 ton winch.
|
